How to Install Mac OS on PC

What to Know

  • You need a fresh copy of macOS, a USB drive, free tools called UniBeast and MultiBeast, and compatible PC hardware.
  • The steps below outline installing a macOS Catalina 10.15.6 on a PC and were tested using an Intel NUC DC3217IYE.
  • You might need to change some configuration settings depending on the PC components you use.

This article covers what you need to build a Hackintosh and why you would build one, how to create a bootable Hackintosh initiation USB drive, and how to install it on a personal computer .

How to Create a Bootable Hackintosh Installation USB Drive

The first step in installing macOS on a personal computer and creating your own Hackintosh is to create a bootable USB with macOS on it. This requires a work Mac that has entree to the Mac App Store, a USB thumb drive, and some time. It is n’t unmanageable, but it is a short time consume, and it ‘s crucial to make certain that you get each footfall precisely veracious.

scroll to the bed to see a full moon list of what you need to build a Hackintosh .

Before you proceed, consider backing up your Mac just in encase you run into any problems during the initial universe of the initiation media. If you have your Mac and a USB thumb drive ready, then you can follow these instructions to make a bootable macOS USB :

  1. Using a Mac, open the Mac App Store .
    A screenshot of the App Store.

  2. Log in using your Apple ID if prompted .

  3. search for and download the latest version of macOS .
    A screenshot of downloading Catalina.

  4. Restart your Mac, holding down Command + R as it starts back up. This will allow you to load into recovery mode .

  5. Release Command + R when you see the Apple icon and progress bar appear .

  6. Wait for macOS Recovery to warhead .
    macOS Utilities in macOS Recovery.

  7. Click Utilities > Terminal .
    A screenshot of selecting the terminal in macOS Utilities.

  8. With the terminal open, type csrutil disable and then press enter .
    A screenshot of disabling SIP in macOS Recovery.

  9. Wait for the terminal to display a message that SIP has been disabled .
    A screenshot of disabling SIP in macOS Recovery.

  10. Click the Apple menu > Restart .
    A screenshot of restarting out of macOS Recovery.

  11. once your Mac has booted up, connect your USB tug .

  12. open Disk Utility .
    macOS Disk Utility.

  13. Select your USB drive in the left column, then click Erase .
    A screenshot of Disk Utility on macOS.

  14. In the pop up menu, enter a name for your USB drive, blue-ribbon Mac OS Extended (Journaled), and click Erase .
    A screenshot of erasing a USB drive on macOS.

  15. Click Done .
    A screenshot of a formatted USB drive.

  16. Run the UniBeast app .
    If you did n’t already download it earlier, download the latest adaptation of UniBeast from the Tonymacx86 tools download part .
  17. Click Continue .
    A screenshot of UniBeast.

  18. Click Continue .
    A screenshot of UniBeast.

  19. Click Continue .
    A screenshot of UniBeast.

  20. Click Continue .
    A screenshot of UniBeast.

  21. Click Agree .
    A screenshot of UniBeast.

  22. Click the USB drive that you set up earlier, and then click Continue .
    A screenshot of UniBeast.

  23. Select Catalina, then pawl Continue .
    A screenshot of UniBeast.

  24. choose UEFI Boot Mode or Legacy Boot Mode, then suction stop Continue .
    A screenshot of the bootloader configuration in UniBeast.
    UEFI Boot Mode is recommended for all systems that are adequate to of using UEFI. entirely choose Legacy Boot Mode if you have older hardware that can only use BIOS .
  25. If you are using an NVIDIA or ATI graphics card, make the appropriate survival and suction stop Continue .
    A screenshot of UniBeast graphics options.

  26. Take a front at your selections, and click Continue if you did n’t make any mistakes .
    A screenshot of UniBeast.

  27. figure your password if prompted, and then click OK .
    A screenshot of UniBeast.

  28. UniBeast will now create your installation media. This action can take a while, so just leave it alone until it ‘s done .

How to Install macOS on a personal computer Using the Installation USB

After you have successfully created your macOS facility USB, you will need to remove it from your Mac and plug it into the personal computer that you want to turn into a Hackintosh. This is a reasonably long process that involves formatting the drive in your personal computer and performing a clean facility of macOS. If you do n’t want to format or erase your drive, you ‘ll have to remove it and install a different one before you proceed.

For this tutorial, an Intel NUC DC3217IYE was used as the personal computer root to create a Hackintosh, and the settings seen in screenshots pertain specifically to that hardware shape. Make sure to select settings that are compatible with your hardware. here ‘s how to install macOS on your personal computer :

  1. From the Clover boot screen door, blue-ribbon Boot macOS Install from Install macOS Catalina .
    Clover bootloader.
    If your personal computer is set to boot from USBs, you ‘ll see this screen without needing to do anything. If it is n’t, you ‘ll have to press F8, F11, F12, or the allow key for your motherboard to choose your USB repel as the boot device .
  2. Select your desire Language, and click the fore arrow .
    Catalina installation language selection.

  3. choice Disk Utility from the macOS Utilities menu .
    The macOS Utilities menu.

  4. Click your PC hard drive in the leave column .
    A screenshot of Disk Utility.

  5. Click Erase .
    A screenshot of the macOS install disk utility.

  6. Enter a fresh name for the drive, choice APFS for the format, and click Erase .
    The macOS installation disk utility.

  7. Click Done .
    A screenshot of the macOS installer disk utility.

  8. reelect to the independent macOS Utilities menu, blue-ribbon Install macOS, and click Continue .
    A screenshot of macOS Utilities on macOS.

  9. Click Continue to proceed with the installation of macOS on your personal computer .
    The macOS Catalina install screen on a Hackintosh.

  10. When you complete the initiation process, your personal computer will reboot. You may need to manually select macOS Catalina from the bootloader if it macOS does n’t load mechanically .

polish Setting Up Your Hackintosh

Your personal computer has macOS installed at this target, and it will credibly work to one academic degree or another depending on the particular hardware that you used. You may find that some peripherals do n’t work quite right, the graphics are n’t displayed correctly, or that there are other issues .

even if your fresh Hackintosh seems to work, the final tone of installing macOS on a personal computer is to run the free MultiBeast instrument from Tonymacx86. This app configures your macOS initiation to work seamlessly with your personal computer hardware, therefore skipping this step is not advisable .

  1. Run the Multibeast app. From the Quick Start menu, select UEFI Boot Mode if your personal computer supports UEFI, or Legacy Boot Mode if it only supports BIOS .
    A screenshot of MultiBeast on a hackintosh.
    If you did n’t already download it earlier, download the latest adaptation of MultiBeast from the Tonymacx86 tools download segment. This is a unlike app from UniBeast, but you can find it in the same location .
  2. Click Drivers, and select the audio drivers that are necessity for your hardware .
    A screenshot of the Drivers tab in MultiBeast.

  3. Click Misc, and select any necessity drivers .
    A screenshot of MultiBeast drivers.
    You may need to besides choice disk, network, or USB drivers depending on your hardware .
  4. Click Bootloaders, and select your desire bootloader .
    A screenshot of bootloader options in MultiBeast.

  5. Click Build, verify your settings, and chatter Save to save your Multibeast settings. If you have problems with these settings, you can load and alter them later to fine tune things .
    Saving MultiBeast settings.

  6. Click Install .
    A screenshot of MultiBeast.

  7. Click Agree .
    A screenshot of MultiBeast on a hackintosh.

  8. record your password if prompted, and suction stop Install Helper .
    A screenshot of MultiBeast on a Hackintosh.

  9. When you see this screen, you can restart your Hackintosh. If it runs as expected, you ‘re done. otherwise you ‘ll need to run MultiBeast again and make certain you have selected all the right drivers and settings for your individual personal computer hardware .
    A screenshot of MultiBeast ready to go.

What You Need to Build a Hackintosh

Building a Hackintosh is a multi-step process that is n’t exceptionally unmanageable, but it is time-consuming, and it ‘s besides very precise. While you can technically build a Hackintosh without any specialize cognition or know, having a backdrop in personal computer building and some cognition of macOS helps .

This is the hardware and software you need before you can build a Hackintosh :

  • macOS compatible hardware: Obtain and assemble computer hardware that’s compatible with macOS. If you aren’t sure if your hardware will work, check sources like, the OSx86 Project,, and the Hackintosh subreddit.
  • A working macOS computer: You need a working modern macOS computer with the App Store to download a fresh copy of macOS.
  • A USB drive: A 16GB or 32GB drive is preferred.
  • UniBeast and MultiBeast: These are free tools available from Tonymacx86.

Why Make a Hackintosh ?

There are a lot of reasons to make a Hackintosh rather of barely buying a Mac, but the primary factor is cost. You can build a Hackintosh with more mighty specifications than any Mac for less money. If you prefer macOS over early operating systems, but you want to save some money by putting together your own system, then building a Hackintosh is an attractive option .

The downside is that Apple does n’t support this procedure, and they have tied actively discouraged it. You wo n’t be able to get technical school back for macOS on your personal computer, and Apple may block services like Facetime and iMessage on your custom Hackintosh a well. If you ‘re will to risk it, then you stand to save some money and have a much greater floor of dominance over your hardware choices than you would with an off the wrack Mac .

Components used to build a Hackintosh.


  • How do you update Mac OS?

    To update Macs running macOS Mojave ( 10.14 ) or late, choose System Preferences > Software Update. You can update Macs running macOS eminent Sierra ( 10.13 ) or earlier through the App Store.

  • How can you run the Windows operating system on a Mac computer?

    To run Windows on a Mac, the best-known option is Boot Camp. This utility is included free with your Mac and allows you to install Windows directly on your Mac ‘s hardware .

reservoir :
Category : Tech FAQ

Related Posts

Leave a Reply

Your email address will not be published.