Bootable Windows USB Drive: Guide for Windows 10, Windows 11, and Windows XP, Vista, 7, 8

This usher explains how to create a Windows bootable USB drive for the postdate Windows versions : Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10, and Windows 11 .
Creating a bootable USB drive will allow you to install Windows from the USB drive directly .
To be able to install Windows from a USB, you need have one of the watch :

  • the ISO image of the Windows version
  • or the original installation disc of the Windows version

If you don ’ thyroxine have either, you can alternatively download an EasyRE ISO effigy that can be made into a bootable USB or four hundred to restore your personal computer.

Prerequisites

Before you start creating a bootable USB flash drive to install Windows ( XP, Vista, 7, 8, 8.1, 10 ), you need to make certain that :

  • The USB drive is empty and properly formatted
  • The USB drive is bootable
  • Your BIOS/UEFI is properly configured to boot from the USB flash drive first
  • You have the ISO image of Windows XP, Vista, 7, 8 or 8.1. If you have the original Windows installation disc, you can use that instead of the ISO image.
  • Software needed to write the ISO image to the USB drive or alternatives, such as Easy USB Creator 2.0 by NeoSmart or the Windows 7 USB/DVD Download Tool by Microsoft.

USB Drive

The USB drive you want to make bootable should have at least 4 GB in available size .

BIOS/UEFI configuration

To make certain that your BIOS/UEFI is configured to boot from a USB tug, follow our boot from USB drive guide. You need to make sure that :
If a Boot Device menu doesn ’ thymine appear on your screen where the USB drive is plugged-in, check the BIOS/UEFI settings. A Boot Device menu can look like this, depending on your calculator model and Windows version :
blank
If you are using a new calculator with UEFI/EFI, make sure that the Boot Legacy option is enabled :
blank blank
If you ’ re using a calculator with Fast Boot choice, make sure that Fast Boot is disabled .
If your BIOS menu doesn ’ t number a USB detail in the BIOS settings, it may mean that it can ’ thyroxine kick from a USB drive. You can try with the USB drive plugged-in and then boot into BIOS directly .
If the detail doesn ’ t appear, you need to use the original Windows facility four hundred or DVD to install Windows or access the rectify tools .
If you need to use the rectify tools of an master Windows facility CD/DVD, you can besides use Easy Recovery Essentials ( download link ) and run Automated Repair to mechanically find and fix boot errors .
blank blank
Download Easy Recovery Essentials

ISO image

If you don ’ t have the ISO picture to create the bootable USB campaign, you can download an official image from Microsoft ’ s web site .
You need to have the product (or license) key.

Create a Windows XP bootable USB

You can create a bootable USB drive with Windows XP by following these instructions .

Using Easy USB Creator 2.0

Easy USB Creator can quickly convert the ISO images into bootable USB drives, with just a single click :
Easy USB Creator 2.0 screenshot Easy USB Creator 2.0 screenshot
Download Easy USB Creator 2.0
To burn Windows XP to a USB driveway using Easy USB Creator 2.0, just follow these steps :

  1. Download USB Creator 2.0
  2. Install Easy USB Creator 2.0
  3. Browse the Windows XP ISO Image to load at the ISO File field
  4. Select the destination of your USB Drive at the Destination Drive field
  5. Start

Easy USB Creator 2.0 supports both USB 2.0 and USB 3.0 .
It ’ s compatible with Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10 plus the Windows Server editions ( 2003, 2008, 2012 ). You must have .NET Framework 2.0 or higher in decree to use Easy USB Creator 2.0

If you have the installation phonograph record ( four hundred )

If you have the original Microsoft Windows XP Professional initiation candle, you can use the compact disk to create a bootable USB using PE Builder .
It ’ sulfur crucial to have the follow before you start :

  • The Windows Server 2003 SP1 archive. If not, download from Microsoft now: Microsoft Windows Server 2003 Service Pack 1 (32 bit)
  • The PE Builder software (BartPE). If not, download BartPE
  • The original CD of Windows XP Professional, not a Windows XP Home CD.
    A Windows XP Home CD will not work .

To create the bootable drive with Windows XP, follow these steps :

  1. Boot into the system
  2. Download the PE Builder software from http://www.nu2.nu/pebuilder/
  3. Install the PE Builder to C:\. The final path should be C:\PEBuilder to make the next steps easier.

Inside the PEBuilder booklet, create a modern folder named SRSP1. This booklet ’ south path should be C:\PEBuilder\SRSP1 .

  • Download the Windows Server 2003 SP1 archive from http://www.microsoft.com/en-us/download/details.aspx?id=1143…
  • Rename the archive downloaded from Microsoft to MS-WS-SP1.exe
  • Open Command Prompt. You can also open it by typing cmd in the Run dialog box and pressing Enter afterwards.
  • Type the cd command to go to the folder where the MS-WS-SP1.exe file exists:
    cd c:\downloads

    Don ’ metric ton type MS-WS-SP1.exe in the way above. You only need to go to the booklet where the file exists .
    Replace c:\downloads with the letter of the drive and the directory where the MS-WP-SP1.exe file exists .

  • Type MS-WS-SP1.exe -x to begin the extraction process, press Enter
  • Choose to extract the files to the same folder, e.g. c:\downloads:
    PEBuilder: Extract FilesPEBuilder: Extract Files
  • In Command Prompt, you now need to go to the extract folder at the i386 sub-folder.To do so, type the same cd command, if you’re still at the c:\downloads folder in Command Prompt and you haven’t created a new folder for the extracted files:
    cd i386

    If you created a new folder for the extract files, say Extract, in cytosine : \downloads, update the certificate of deposit command to go to that folder :

    cd c:\downloads\Extract

    then, type cd i386, press insert

  • Once inside the i386 folder via Command Prompt, type:
    copy setupldr.bin c:\PEBuilder\SRSP1

    Replace c:\PEBuilder\ with the way where the PE Builder software is installed, if this was changed in previous steps .

  • While still in Command Prompt, expand the ramdisk.sys file with this command:
    expand -r ramdisk.sy_ c:\PEBuilder\SRSP1

    Replace c:\PEBuilder\ with the way where the PE Builder software is installed, if this was changed in previous steps .

  • Go to My Computer
  • Go to PEBuilder folder
  • Go to SRSP1 folder
  • Check that you have the 2 files listed there: setupldr.bin and ramdisk.sys
    PEBuilder: Check that you have the files copiedPEBuilder: Check that you have the files copied
  • Insert the Windows XP Professional CD in the disk tray
  • Launch PE Builder
  • Make the following changes before you click Build:
    BartPE: Configuration for Windows XP USBBartPE: Configuration for Windows XP USB

    • At the Source field, type the letter of the drive for the Windows XP CD, e.g. e:\
    • At the Output field, type BartPE
    • Leave the Custom field blank
    • Media output should be None
  • Click Build
  • When the build process is complete, click Close
  • Go to Command Prompt and then go to the PEBuilder folder by typing the cd command:
    cd c:\PEBuilder
  • Type this command (make sure the USB flash drive is not removed) and press Enter:
    pe2usb -f d:

    Replace d: with the letter of the drive where your USB flash drive is loaded .

  • Type YES, when prompted to begin the process. Press Enter after typing YES.
  • Press any key to exit the pe2usb process, after the process is complete
  • Safely remove the USB flash drive from the port
  • Remove the Windows XP CD from the disk try
  • Reboot the system to check if the USB flash drive is now bootable with Windows XP Professional

If your computer doesn ’ t bang into the USB drive directly, go to Prerequisites > BIOS/UEFI configuration or read the Boot from USB drive lead to configure your BIOS menu to kick from a USB device first base .

Create a Windows Vista bootable USB

Depending if you have the ISO persona of Windows Vista or the original DVD, you can use Easy USB Creator 2.0 or the diskpart utility to create the bootable USB .

If you have the ISO image

Using Easy USB Creator 2.0

Easy USB Creator can promptly convert the ISO images into bootable USB drives, with just a single click :
Easy USB Creator 2.0 screenshot Easy USB Creator 2.0 screenshot
Download Easy USB Creator 2.0
To burn Windows Vista to a USB drive using Easy USB Creator 2.0, simply follow these steps :

  1. Download USB Creator 2.0
  2. Install Easy USB Creator 2.0
  3. Browse the Windows Vista ISO Image to load at the ISO File field
  4. Select the destination of your USB Drive at the Destination Drive field
  5. Start

Easy USB Creator 2.0 supports both USB 2.0 and USB 3.0 .
It ’ s compatible with Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10 plus the Windows Server editions ( 2003, 2008, 2012 ). You must have .NET Framework 2.0 or higher in ordain to use Easy USB Creator 2.0

Using Windows 7 USB/DVD Download Tool

To create the bootable force with the Windows 7 USB/DVD Download Tool, follow the steps from Using the Windows 7 USB/DVD Download Tool from Windows 8/8.1 .
While the name is “ Windows 7 ”, you can use the joyride for Windows Vista systems excessively .

If you have the facility disk ( DVD )

To create a bootable USB with Windows Vista and install the manoeuver system from that USB drive, follow the steps .
You ’ ll be using the diskpart utility, available in Windows Vista, to make the USB drive bootable. You ’ ll copy the files from the facility phonograph record ( DVD ) to the USB force after the diskpart utility process is finished .
The instructions are :

  1. Boot your computer
  2. Open Command Prompt and run it as Administrator.You can go at Start > All Programs Accessories > Command Prompt or type cmd in the search field.To run Command Prompt as Administrator, right-click on the Command Prompt item and select Run as Administrator.
  3. When Command Prompt opens, type this command and press Enter:
    cd c:\windows\system32

    Replace c:\ with the letter of the driver where your Windows Vista is installed : hundred : \, D : \ etc .

  4. Insert the USB flash drive in the USB port
  5. Type:
    diskpart
  6. Press Enter
  7. Type:
    list disk
  8. Press Enter
  9. After you press Enter for the list disk command, Command Prompt will list the drives that are connected to your computer. Find the USB drive and its corresponding number.
    Command Prompt: list diskCommand Prompt: list disk
  10. Then, type this command:
    select disk X

    Where X is the number of the USB flash drive listed by Command Prompt .
    The ratification message should be :

    Disk 1 is now the selected disk.
  11. Press Enter
  12. Type clean and press Enter
  13. Type create partition primary and press Enter
  14. Type select partition 1 and press Enter
  15. Type active and press Enter
  16. Type this command and press Enter afterwards:
    format fs=ntfs

    It may take a few minutes to format the entire USB flash drive, depending on its size. however, you can use the quick argument to format the drive more cursorily :

    format fs=ntfs quick
  17. Type assign, press Enter
  18. Type exit, press Enter
  19. Insert the Windows Vista DVD in the optical drive
  20. Go to My Computer
  21. Note the letter of the drive where the Windows Vista DVD is loaded, e.g. D:\, E:\
  22. Go back to Command Prompt and check if the USB flash drive has been formatted
  23. When the format process is complete, type this command and press Enter:
    d: cd boot

    Replace D: with the letter of the drive where the Windows Vista DVD is loaded

  24. Then type cd boot and press Enter
  25. Type this command and press Enter:
    bootsect.exe /nt60 f:

    Where f: is the letter of the drive where your USB flash drive is loaded

  26. Copy all files from the Windows Vista DVD on the USB flash drive.To open the contents of the DVD (and not load the splash screen of the Windows Vista DVD), right-click on the drive and click Open.

If you followed the above instructions correctly, the USB flash drive should nowadays be bootable with Windows Vista .
You can check this by plugging the USB and rebooting the system. To make certain that your computer boots from a USB drive first, and not from the hard disk, go to BIOS/UEFI configuration .

Create a Windows 7 bootable USB

You can create the bootable USB force with Windows 7, if :

  • you have the ISO image of Windows 7
  • or you have the original installation DVD of Windows 7

If you have the ISO double

Using Easy USB Creator 2.0

Easy USB Creator can quickly convert the ISO images into bootable USB drives, with just a single click :

Download Easy USB Creator 2.0
To burn Windows 7 to a USB drive using Easy USB Creator 2.0, simply follow these steps :

  1. Download USB Creator 2.0
  2. Install Easy USB Creator 2.0
  3. Browse the Windows 7 ISO Image to load at the ISO File field
  4. Select the destination of your USB Drive at the Destination Drive field
  5. Start

Easy USB Creator 2.0 supports both USB 2.0 and USB 3.0 .
It ’ s compatible with Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10 plus the Windows Server editions ( 2003, 2008, 2012 ). You must have .NET Framework 2.0 or higher in order to use Easy USB Creator 2.0

Using Windows 7 USB/DVD Download Tool

The Windows 7 USB/DVD Download Tool is available to download and you can use it to create a bootable ISO trope from the ISO image you purchased and downloaded from Microsoft .
Before you continue with these instructions, please make certain that :

  • You have the Windows 7 USB/DVD Download Tool downloaded. If not, download Windows 7 USB/DVD Download Tool now.
  • You have the Windows 7 ISO Image ready

The instructions are :

  1. Download Windows 7 USB/DVD Download Tool from http://wudt.codeplex.com/ and launch it
  2. At the Source File field, click Browse and find the Windows 7 ISO image on your computer and load it
    Windows 7 USB/DVD Download Tool: Source FileWindows 7 USB/DVD Download Tool: Source File
  3. Click Next
  4. Select USB Device
  5. Select the USB flash drive from the drop down menu
  6. Click Begin copying
  7. Exit the application, when the process is complete

If you have the initiation magnetic disk ( DVD )

You can use a USB flaunt drive ( see Prerequisites for more information ) to install Windows 7 from .
To do so, you need to make the USB news bulletin campaign bootable first and then use the original Windows 7 initiation disk ( DVD ) to copy the contents of the DVD to the USB drive .
The diskpart utility, part of Windows 7, will be used .
Follow these steps ( similar to Create a Windows Vista bootable USB > If you have an facility disk ) :

  1. Start the computer
  2. Open Command Prompt as Administrator. Go at Start > All Programs Accessories > right-click on the Command Prompt item and select Run as Administrator.
  3. Enter the password for the Administrator account
  4. At Command Prompt, type:
    cd c:\windows\system32

    Replace c:\ with the letter of the driver where your Windows 7 is installed : c : \, D : \ etc .

  5. Press Enter
  6. Insert the USB drive that you want to make bootable in an available port
  7. Type diskpart and press Enter
  8. Type list disk and press Enter
    Command Prompt: list diskCommand Prompt: list disk
  9. Find the USB drive and its corresponding number in the list provided by Command Prompt
  10. Type this command and press Enter:
    select disk X

    Where X is the number of the USB drive listed by Command Prompt above .
    The confirmation message should be :

    Disk 1 is now the selected disk.
  11. Type clean, press Enter
  12. Type create partition primary, press Enter
  13. Type select partition 1, press Enter
  14. Type active, press Enter
  15. Type format fs=ntfs and press Enter.

You can use the quick parameter to format the drive more promptly : format fs=ntfs quick

  • Insert the Windows 7 DVD and go to My Computer. Note the letter of the drive where the DVD is loaded, e.g. D:\, E:\
  • Type assign, press Enter
  • Type exit, press Enter
  • After the format process is complete, type this command in Command Prompt and press Enter:
    d: cd boot

    Where d: with the letter of the drive where the Windows 7 DVD is loaded .

  • Type cd boot, press Enter
  • Type this command and press Enter:
    bootsect.exe /nt60 f:

    Where f: is the letter of the drive where the USB flash drive is loaded

  • Open the contents of the Windows 7 DVD: right-click on the drive and click Open
  • Copy all files from the DVD to the USB

Create a Windows 8 / 8.1 bootable USB

Depending if you have the ISO effigy of Windows Vista or the original DVD, you can use Easy USB Creator 2.0 to create the USB if you have the ISO image or the diskpart utility program to create the bootable USB, if you have the DVD .

If you have the ISO persona

Using Easy USB Creator 2.0

Easy USB Creator can promptly convert the ISO images into bootable USB drives, with just a single click :

Download Easy USB Creator 2.0
To burn Windows 8 or 8.1 to a USB drive using Easy USB Creator 2.0, plainly follow these steps :

  1. Download USB Creator 2.0
  2. Install Easy USB Creator 2.0
  3. Browse the Windows 8 or Windows 8.1 ISO Image to load at the ISO File field
  4. Select the destination of your USB Drive at the Destination Drive field
  5. Start

Easy USB Creator 2.0 supports both USB 2.0 and USB 3.0 .
It ’ s compatible with Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10 plus the Windows Server editions ( 2003, 2008, 2012 ). You must have .NET Framework 2.0 or higher in order to use Easy USB Creator 2.0

Using Windows 7 USB/DVD Download Tool

The Windows 7 USB/DVD Download Tool is available to download and you can use it to create a bootable ISO trope from the ISO trope you purchased and downloaded from Microsoft .
While the name is “ Windows 7 ”, you can use this cock on a Windows 8 or 8.1 system excessively .
Before you continue with these instructions, please make certain that :

  • You have the Windows 7 USB/DVD Download Tool downloaded. If not, download the Windows 7 USB/DVD Download Tool now.
  • You have the Windows 8 or 8.1 ISO Image ready

The instructions are :

  1. Launch the Windows 7 USB/DVD Download Tool
  2. At the Source File field, click Browse and find the Windows 8 or 8.1 ISO image on your computer
    Windows 7 USB/DVD Download Tool: Source FileWindows 7 USB/DVD Download Tool: Source File
  3. Click Next
  4. Insert the USB flash drive in an available port on your computer. Make sure it’s loaded in My Computer.
  5. At Step 2, select USB Device to write the ISO image to the USB drive. You can click DVD to write the ISO image to a DVD instead.
    Windows 7 USB/DVD Download Tool: Choose Media TypeWindows 7 USB/DVD Download Tool: Choose Media Type
  6. At Step 3, select the USB flash drive from the drop down menu. If the drive isn’t loaded yet, you can click on the Refresh icon next to the drop down menu.
  7. Click Begin copying
  8. When done, exit the Windows 7 USB/DVD Download Tool
    Windows 7 USB/DVD Download Tool: DoneWindows 7 USB/DVD Download Tool: Done

If you have the initiation disk ( DVD )

If you have the master initiation disk ( DVD ) of Microsoft Windows 8 or Windows 8.1 you can create a bootable USB repel .
To do sol, follow the steps below :

  1. Boot into Windows 8 or 8.1
  2. Open Command Prompt as Administrator. To do so, press the blankblank and C key to search for cmd. From the search results list, right-click on Command Prompt
    blankblank
  3. Click Run as administrator
    blankblank
  4. Enter the password, when prompted
  5. When Command Prompt opens, type this command and press Enter:
    diskpart
  6. Insert the USB flash drive in the port
  7. Type list disk, press Enter
    Command Prompt: list diskCommand Prompt: list disk
  8. Identify the number next of the USB drive in the list provided by the list disk command
  9. Type select disk X, press Enter. Replace X with the number of the USB drive listed from above steps.
    Command Prompt: select diskCommand Prompt: select disk
    The confirmation message should be :

    Disk 1 is now the selected disk.
  10. Type clean, press Enter
  11. Type create partition primary, press Enter
  12. Type select partition 1, press Enter
  13. Type active, press Enter
  14. Type format fs=ntfs, press Enter. To have the USB drive formatted more quickly, add the quick parameter: format fs=ntfs quick
  15. Type assign, press Enter
  16. Type exit, press Enter
  17. Copy the contents of the Windows 8 DVD or 8.1 DVD to the USB flash drive

Create a Windows 10 bootable USB

If you have the ISO picture

Using Easy USB Creator 2.0

Easy USB Creator can quickly convert the ISO images into bootable USB drives, with just a single click :
easyusb_win10 easyusb_win10
Download Easy USB Creator 2.0
To burn Windows 10 to a USB force using Easy USB Creator 2.0, just follow these steps :

  1. Download USB Creator 2.0
  2. Install Easy USB Creator 2.0
  3. Browse the Windows 10 ISO Image to load at the ISO File field
  4. Select the destination of your USB Drive at the Destination Drive field
  5. Start

Easy USB Creator 2.0 supports both USB 2.0 and USB 3.0 .
It ’ s compatible with Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10 plus the Windows Server editions ( 2003, 2008, 2012 ). You must have .NET Framework 2.0 or higher in order to use Easy USB Creator 2.0

Using Windows 7 USB/DVD Download Tool

The Windows 7 USB/DVD Download Tool is available to download and you can use it to create a bootable ISO effigy from the ISO persona you purchased and downloaded from Microsoft .
While the name is “ Windows 7 ”, you can use this joyride on a Windows 10 system besides .
Before you continue with these instructions, please make indisputable that :

  • You have the Windows 7 USB/DVD Download Tool downloaded. If not, download the Windows 7 USB/DVD Download Tool now.
  • You have the Windows 10 ISO Image ready

The instructions are :

  1. Launch the Windows 7 USB/DVD Download Tool
  2. At the Source File field, click Browse and find the Windows 10 ISO image on your computer
    Windows 7 USB/DVD Download Tool: Source FileWindows 7 USB/DVD Download Tool: Source File
  3. Click Next
  4. Insert the USB flash drive in an available port on your computer. Make sure it’s loaded in My Computer.
  5. At Step 2, select USB Device to write the ISO image to the USB drive. You can click DVD to write the ISO image to a DVD instead.
    Windows 7 USB/DVD Download Tool: Choose Media TypeWindows 7 USB/DVD Download Tool: Choose Media Type
  6. At Step 3, select the USB flash drive from the drop down menu. If the drive isn’t loaded yet, you can click on the Refresh icon next to the drop down menu.
  7. Click Begin copying
  8. When done, exit the Windows 7 USB/DVD Download Tool
    Windows 7 USB/DVD Download Tool: DoneWindows 7 USB/DVD Download Tool: Done

If you have the facility magnetic disk ( DVD )

If you have the original initiation phonograph record ( DVD ) of Microsoft Windows 10 you can create a bootable USB drive .
To do indeed, follow the steps below :

  1. Boot into Windows 10
  2. Open Command Prompt as Administrator. To do so, press the and C key to search for cmd. From the search results list, make sure Command Prompt is the chosen result than use the “Run as Administrator” option on the side:
  3. Enter the password, when prompted
  4. When Command Prompt opens, type this command and press Enter:
    diskpart
  5. Insert the USB flash drive in the port
  6. Type list disk, press Enter
    Command Prompt: list diskCommand Prompt: list disk
  7. Identify the number next of the USB drive in the list provided by the list disk command
  8. Type select disk X, press Enter. Replace X with the number of the USB drive listed from above steps.
    Command Prompt: select diskCommand Prompt: select disk
    The confirmation message should be :

    Disk 1 is now the selected disk.
  9. Type clean, press Enter
  10. Type create partition primary, press Enter
  11. Type select partition 1, press Enter
  12. Type active, press Enter
  13. Type format fs=ntfs, press Enter. To have the USB drive formatted more quickly, add the quick parameter: format fs=ntfs quick
  14. Type assign, press Enter
  15. Type exit, press Enter
  16. Copy the contents of the Windows 10 DVD to the USB flash drive

Troubleshooting

frame-up can not find the End User Licensing Agreement ( EULA )

You may receive this error when trying to write a Windows ( XP, Vista, 7, 8, 8.1 ) ISO Image to a USB drive and make it bootable :

Setup cannot find the End User Licensing Agreement (EULA) Setup cannot continue.

To Quit, Press F3

If so, the ISO persona might be corrupted. In this subject, you can try :

  • download a new ISO image from Microsoft
  • use the original installation disc instead to create the bootable drive (instructions for using the disc instead of the ISO image are available in this guide for all Windows versions)
  • use Easy Recovery Essentials if you’re looking for accessing repair tools. Run EasyRE’s Automated Repair feature to automatically scan and fix various boot errors. Other features are available.

Download Windows 7 USB/DVD Download Tool

To download the Windows 7 USB/DVD Download Tool, go to http : //wudt.codeplex.com/ .

Bootable USB will not boot

To make certain that the USB drive will boot when starting your computer, make surely that :

  • Your BIOS configuration allows USB drives to boot first and then boot from hard disk. Follow the steps from BIOS/UEFI configuration or the our Boot from USB drive guide.

If you created the bootable USB drive using the Windows 7 USB/DVD Download Tool, new computers with UEFI might not boot from the USB as it ’ mho been formatted using NTFS and not FAT32.

To get around this, follow these steps :

  1. After the Windows 7 USB/DVD Download Tool successfully created the bootable USB drive, go to My Computer and copy all contents from the USB drive to a folder on your Desktop
    Windows 7 USB/DVD Download Tool: DoneWindows 7 USB/DVD Download Tool: Done
  2. Right-click on the USB Drive in My Computer and format it as FAT32
  3. After the format process is complete, copy all files from the folder you created on your Desktop back to the USB drive

More data

applicable Systems

This Windows-related knowledgebase article applies to the following operate systems :

  • Windows XP (all editions)
  • Windows Vista (all editions)
  • Windows 7 (all editions)
  • Windows 8 (all editions)
  • Windows 8.1 (all editions)
  • Windows 10 (all editions)
  • Windows 11 (all editions)
  • Windows Server 2003 (all editions)
  • Windows Server 2008 (all editions)
  • Windows Server 2012 (all editions)

Propose an edit

source : https://swivelcard.info
Category : Tech FAQ

Related Posts

Leave a Reply

Your email address will not be published.